Fans of military technology may be quite familiar with radar technology. Individuals who enjoy air or marine travel have also benefited from this technology as well. Radar systems have changed quite a bit since the early days and one major change is the switch to a monopulse system. A monopulse comparator is a part of this system that has greatly increased the accuracy of modern systems. Here is what you need to know about these devices and how they have improved radar systems in general.
Radar systems were first developed and used by the military. Various countries found it very helpful to be able to detect approaching objects, find out how fast they were moving and what direction they were moving in. It allowed them to detect potential incoming attacks while paying less attention to non-hostile objects or aircraft. Now these systems are used by many different groups and organizations.
Meteorologists have also started using these systems to monitor the weather and create forecasts. They can be very helpful if a severe weather system is expected. Radar can be used to determine how large or severe a storm such as a hurricane or a tornado is. Other types of storms such as blizzards and thunderstorms can also be mapped using these systems.
Radar is also used in marine environments. Ships can use it to detect other vessels that may be occupying the same area of water and can also use it to determine where they are located. This is done by bouncing signals off of known reference points such as buoys or, if close enough, the shoreline as well.
All systems are made up of the same basic components. Frequencies are generated by a transmitter. There are several different types of these, some of which are more suitable for specific uses than others. The frequency is sent to an antenna by a waveguide. Then, the antenna sends out the signal. A duplexer switches the antenna over into receiving mode so the returning radio waves can be interpreted. This is done using a receiver and the operator will see the results on a display processor.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
A comparator allows for a radar beam to split into multiple segments. Originally the beam was split into two sections although now there are comparators which allow for a beam to be split into four sections instead. When the beams are compared, the slight differences in position between each of the beams allows the radar system to more precisely locate where a particular object it is or how fast it is moving.
There are several different types of these devices. The type that you choose will depend on exactly which kind of radar system you have set up. You can find comparators online although generally only on specialty websites that offer other radar equipment as well.
Radar systems were first developed and used by the military. Various countries found it very helpful to be able to detect approaching objects, find out how fast they were moving and what direction they were moving in. It allowed them to detect potential incoming attacks while paying less attention to non-hostile objects or aircraft. Now these systems are used by many different groups and organizations.
Meteorologists have also started using these systems to monitor the weather and create forecasts. They can be very helpful if a severe weather system is expected. Radar can be used to determine how large or severe a storm such as a hurricane or a tornado is. Other types of storms such as blizzards and thunderstorms can also be mapped using these systems.
Radar is also used in marine environments. Ships can use it to detect other vessels that may be occupying the same area of water and can also use it to determine where they are located. This is done by bouncing signals off of known reference points such as buoys or, if close enough, the shoreline as well.
All systems are made up of the same basic components. Frequencies are generated by a transmitter. There are several different types of these, some of which are more suitable for specific uses than others. The frequency is sent to an antenna by a waveguide. Then, the antenna sends out the signal. A duplexer switches the antenna over into receiving mode so the returning radio waves can be interpreted. This is done using a receiver and the operator will see the results on a display processor.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
A comparator allows for a radar beam to split into multiple segments. Originally the beam was split into two sections although now there are comparators which allow for a beam to be split into four sections instead. When the beams are compared, the slight differences in position between each of the beams allows the radar system to more precisely locate where a particular object it is or how fast it is moving.
There are several different types of these devices. The type that you choose will depend on exactly which kind of radar system you have set up. You can find comparators online although generally only on specialty websites that offer other radar equipment as well.
About the Author:
You can find affordable monopulse comparator by visiting our web pages now. Why look anywhere else when you can find it all here at http://etiworld.com.